Resources
| RACE TECH |
| www.racetech.com |
| Race Tech suspension kit |
$259.99 |
| Race Tech SW3 fork oil |
$29.99 |
Tool Box
A
Bike Jack is prerequisite for this job; doing it on a milk crate is asking for trouble.
Appropriate hand tools:
Sockets, Wrenches, Plastic Mallet, Hammer, Center Punch.
A
3/8th Electric Drill and a
5/16ths Bit. You might want an extra bit in case you dull or damage one.
A
Pipe Cutter to cut the preload spacers to size.
A
Small Rat-Tail File to deburr the drilled holes.
You'll also need a
Drain Pan, Tape Measure, Flashlight, Lots Of Rags and Aerosol Degreaser (like brake clean or electrical contact cleaner).
I'd also recommend installing
New Washers under the damper rod bolts; you can use OEM or over-the-counter copper or aluminum crush washers.