Race Tech Gold Valve Cartridge Emulator And Spring Kit Hole Drilling
How To: Race Tech Gold Valve Cartridge Emulator and Spring Kit
To work properly with the Gold Valve, your OEM damper rod needs at least six compression holes with a minimum diameter of 5/16th of an inch. In most cases that'll mean enlarging the stock holes, and quite possibly drilling some additional ones. In this instance the stock damper rod had six holes so all we had to do was make sure they were 5/16's of an inch.
If you're drilling new holes, locate them 7/16's of an inch above and below the centerline of the OEM holes. To avoid weakening the damper rod, drill the new holes at right angles to the existing ones. Be sure you clean and deburr them too. View Related Article
|
|