Motosens Instrument Install 12 Volt DC Power Source
Motorcycle Instrument Install - How To
|
Our Motosens gauges (and all other electronic gauges) require a switch controlled 12-volt DC power source and a ground. Fortunately, the VTX has an optional fog light connector that provides both in the same plug, so that's what I used. Typically most bikes will have an accessory terminal located somewhere on the bike that provides switched current, and the ground can be picked up anywhere close by. Make absolutely certain that the ignition switch controls the current to the gauge, otherwise power will flow to the gauge when the bike is off, eventually killing the battery. View Related Article
|
|