Photography by Kevin Win...
Apparently, nostalgia is still what it used to be. From Mustangs to Minis to Miatas, from Chrysler PT Cruisers to Ford and Triumph T-Birds, it seems everything old is new again when you ride down the street.
Harley-Davidson has been evoking the style and spirit of motorcycles past longer and more successfully than any other motorcycle makeror vehicle builders in general. (Well, except for Russia's Ural, which has barely changed designs in over half a century.) Harley seemed to be the first to recognize how appealing the elegant lines and unhurried attitude of midcentury motorcycles could be. It also had a completely authentic heritage to carry it off.
Among Harley's latest rides down memory lane, you'll find the Softail Springer Classic, a new-for-2005 model that pays homage to the last of Harley's original line of springer-fork motorcycles. That machine, the 1948 FL, was also the first to use a knucklehead engine with hydraulic valve adjustment.
The '05 version reflects some of the details of the postwar model better than any previous modern Springer. The fork assembly's legs, for example, are black powdercoated to mimic '48's black enamel finish, which had much less chrome than current bikes. This fork bows to modern tastes with its chrome springs and damper assembly. However, the fork straddles a deep fender uninterrupted by chrome or logos, crowned by a running light at its tip. The blackout treatment extends to the oil tank, which also gets a badge recreating a label listing Harley patents. The label was last used on new bikes in the '40s. Although chrome, the exhaust system mimics the '48 bike's 2-into-1 systemat least from the right. The '05 Springer Classic also has an additional muffler on the left, which permits better performance than a single muffler. The aluminum tank graphic with stamped-aluminum trim (taken from Harleys of the early '40s) running around the tank like a belt adds another classic touch.
The black-and-chrome finish...
The black-and-chrome finish on the engine looks almost out of place in this nostalgic platform, but it is easy to appreciate the engine's power and counterbalanced smoothness.
Wire-spoke wheels (with tube-type tires) are de rigueur on any retro bike, though you wouldn't have seen as much bright metal as these have in a pre-'50s motorcycle. The Profile wheel rims on our bike (a $275 option), with their nicely rounded shoulders, add an elegant touch that seems right at home on a classic machine.
Few potential buyers would actually want to ride a '48 motorcycle regularly, unless kickstarting, manual ignition advance, poor lighting, unimpressive brakes and dozens of other issues that have been overcome in the last five-and-a-half decades seem attractive. However, Harley's stylists and engineers have found clever ways to maintain classic styling elements. The Softail rear suspension, for example, offers the clean look of the hardtail frame used on the original '48 model but conceals two spring-damper assemblies under the engine to absorb some of the shock of modern roads.
Vibration, a fact of life on the 1000 and 1200cc engines powering the '48 model, has been thoroughly suppressed by dual counterbalancers in the current 1450cc Twin Cam engine, which also offers electric starting, fuel injection, fiddle-free electronic ignition, about twice the horsepower and dozens upon dozens of changes to the design, systems and materials that have improved reliability and ease of maintenance since '48. It retains the 45-degree V, air-cooling, two valves operated by pushrods, "knife-and-fork" connecting rods and other details of that first bike with hydraulic lifters, but you won't find any significant common partsor miss them.
That front fender light is...
That front fender light is nostalgic, but wasn't standard on the 1948 original.
Although relatively small in terms of displacement by comparison to other V-twins, the 1450cc Harley engines can more than hold their own in terms of power against most of the 1500 to 1700cc machines. (Victory's more powerful 1500s are the notable exception.) Even though other bikes boast liquid cooling, overhead cams, four valves per cylinder and other features associated with performance, Harley's simple two-valve OHV twins make great total power. The TC 88 engine in the Softail Springer Classic pulls willingly from idle and goes strong until the rev limiter begins to shut things down. Although the bike is heavy, it accelerates hard enough to give you the advantage in traffic and still has something in reserve at 75 mph. The Electronic Sequential Port Fuel Injection (ESPFI) delivers great throttle response while retaining Harley's traditionally good fuel mileage. With the mild-mannered riding this motorcycle suggests, it's easy to get 40 mph, though you'll need to pay for premium fuel when you do top off the 5.0-gallon tank.
The Springer's small headlight...
The Springer's small headlight works too much like its 1948 counterpart, casting less light ahead than we are used to. Although we have become accustomed to chrome, it was scarce on postwar motorcycles. By powdercoating the fork black, Harley has more closely captured the look of the original.
Since vibration isn't an issue thanks to the counterbalancers, you don't get buzzed at highway speeds, though extended high-speed rides might call for a windshield. The beach-style handlebar's bend forces you to grip tightly to counter wind pressure because the turned-back grip configuration means you can't just hook your fingers around the bar to hold on. Average and shorter riders liked the seating and ergonomics, but taller and long-legged riders wanted a bit more room rearward on the saddle. Swapping saddles is often a no-brainer in these situations, but you might have trouble parting with the stock seat on the Springer because the standard item, skirted with leather detailing and chrome badges, is a significant component of the bike's style. The narrow passenger pad can be quickly removed if you want a more classic solo-saddle look. (Some passengers opined they would be barely worse off without it.) We doubt many of these bikes will be bought for long-distance use, so the stock saddle should be fine for short hauls.
People wonder if the Springer fork rides as well as a telescopic design, and we always tell them that for cruiser duty it works better because it isn't hindered by the seal friction that slows the response of telefork legs over small bumps. Even though travel is limitedjust 2.3 inchesthe fork still rode better over large, sharp bumps than the rear suspension, which has an additional two inches of travel. Large, sharp bumps hit you harder than on most cruisers, and mainly through the rear end.
Using a single muffler on...
Using a single muffler on each side of the motorcycle recreates the style of the single-muffler 1948 FL, at least on the right side.
The Springer fork comes up short in one aspect, however. While other Harleys have switched to four-piston brakes for both wheels, the Springer models have the old, less-powerful single-piston caliper up front. Harley says the Springer fork (introduced in its current form in '88) would require a substantial redesign to handle the more powerful four-piston brake (introduced more than a decade later), presumably because of the additional torsional loads the bike generates. As a result, you need to clamp down on the front brake lever pretty enthusiastically to approach the stopping power you get with other Harley brakes, something riders with smaller or arthritic hands may find difficult. Even though the majority of the Springer Classic's static weight is on the rear wheel and its four-piston brake, and 64.5 inches of wheelbase reduces weight transfer forward, in a serious stop you'll wish for less nostalgic braking up front.
Footboards are a natural choice...
Footboards are a natural choice for such a nostalgic motorcycle. Harley's accessory folks offer more than 100 pieces to modify the rider and passenger footrests and controls.
You might not expect such a low-tech-looking motorcycle to work well when the road bends, but the Springer Classic actually provides better cornering clearance than many more modern cruisers and comparable stability when leaned over and dragging. The steering is somewhat heavy, but that is to be expected when you are herding half a ton of motorcycle (731 pounds without fluids) and rider. Not that it really seems to be an issue. We doubt many potential buyers look at this motorcycle and think, "Oooh, twisties!"
More likely they will be thinking about the reaction they will receive, and from our experience it will be hugely positive. Women fawned over it. Men tried to determine if it was something new or just a beautiful restoration (and a few had trouble believing us when we said it was a '05 model). Certainly that aura of mid-20th-century elegance comes through clearly.
Classically skirted, the seat...
Classically skirted, the seat is wide and well padded, though longer-legged riders will want more room rearward. You can remove the narrow passenger section in seconds.
The elegance also comes through in the pricing. With a suggested base price of $16,995, the Softail Springer Classic is among the company's pricier standard non-dresser models. Adding ESPFI raises that by $400 (unless you buy a California model, in which case the cost of meeting the emissions requirements is $190 less than the carbureted version), and our burgundy paint (Harley calls it Black Cherry Pearl, and you can also select blue or black-pearl solid colors) adds $285 over basic black or red/black, and blue/silver two-tones add an additional $140. With the pretty wheels, the MSRP for our bike would be $18,155before charges for California emissions, taxes or any of the many accessories with which Harley or the aftermarket might tempt you. At the time of this writing, we counted more than 1200 accessories for this bike alone on Harley's web site, and the company is constantly devising new ones. Expect to spend $20,000, and the dealer may add a surcharge to that.
Worth it? Only the buyer can decide, but the Softail Springer Classic offers an unmatched measure of nostalgia in a pleasant, casual cruiser.
High Points: Most nostalgic styling on a modern motorcycle with great curb appeal; good power and fuel mileage
Low Points: Front brake too nostalgic; rear suspension harsh on bigger bumps
First Changes: Better rear dampers
2004 Harley-Davidson FLSTSCI Softail Springer Classic
Suggested base price: $16,995
Engine type: Air-cooled 45-degree OHV V-twin
Displacement, bore x stroke: 1450cc, 95.2 x 101.5mm
Compression ratio: 8.9:1
Transmission: 5 speeds
Final drive: Belt
Wet weight: 734 lbs.
Wheelbase: 64.5 in.
Seat height: 27.4 in.
Front tire: MT90-B16 Dunlop 402F tube-type
Rear tire: 150/80B16 Dunlop 401 tube-type
Front brake: 11.5-in. disc, single-piston caliper
Rear brake: 1.5-in. disc, four-piston caliper
Front suspension: Harley Springer leading link, 2.3 in. travel
Rear suspension: Harley Softail, 2 dampers, 4.3 in. travel
Quarter-mile acceleration: 14.26 sec., 92.6 mph
This 1948 FL, the flagship...
This 1948 FL, the flagship of Harley's fleet that year, inspired 2005's Softail Springer Classic. Harley was getting back to full civilian production following wartime shortages (leather jackets were still often made from horsehide). This bike used a forkwith a damper!introduced in '46. However, the fork was discontinued in '49 in favor of the Hydra-Glide telescopic fork. The '48 bike was also the first to offer the new aluminum-head motor with hydraulic lifters. So until '88, the modern engine with self-adjusting valves and the springer fork only comingled in '48.
Art Friedman: After testing motorcycles for more than 30 years, I don't need to be reminded yet again that those fondly remembered old bikes of decades ago are never as much fun (or as big) as I recalled them to be. But I am still a sucker for modern bikes that successfully evoke them. Some do it better than others. A few years ago, Kawasaki's copy of the old Triumph twins turned my head. It recreated the look and feel of those classic Brit bikes better than the new Triumph did, though it was Triumph's Bonneville that survived, perhaps because it worked better. I can't say that either Indian's or Kawasaki's revival of the old Indians ever piqued my interest, but the classically styled Springers do, and this one is the best yet.
It would be fun to see how close you could get it to the 1948 originalpull off the passenger saddle, black out most of the chrome, install a low-riding rear fender and make other changes to enhance the illusion of midcentury origins. But I'd also like to change the rear shocks, the handlebar and probably the seat to make it more rideable.
Andrew Cherney: At first I thought, here we go againanother repackaged Softail with bold new graphics and a steep price tag. But I was only right about the latter. Passersby on the streets swooned over this Softail's minimally chromed, blacked-out color scheme and the redesigned springer front end (which actually works). Even my sport-riding buddies grudgingly acknowledged the bike's "cool" quotient, and the girlfriend was pretty well pleased with the passenger accommodations (can't underestimate the importance of this). Thing is, the Springer's actually a fun bike to ride, too. Yeah, the front single-disc brake can be hair-raising in panic mode and the clutch pull works your forearms to the bone when tooling through traffic, but the front suspension is surprisingly compliant for a bike this size, and the fuel-injected Twin Cam 88B mill was smoother than some metric bikes I've ridden lately. Then again, one look at the price tag reminded me that nostalgia don't come cheap.